Omnex Wireless Software Change

Omnex changed their software 16-bit to 24-bit in October 2014. As a result of this change, existing 16-bit Omnex receivers will not communicate with the updated 24-bit transmitters so the receiver will also need to be replaced as well.

**Note: Newer 24-bit receivers will continue to communicate with 16-bit transmitters. Therefore, if you have a 16-bit receiver that needs to be replaced, you can order a new 24-bit receiver and it will communicate with existing 16-bit transmitters.

All cranes using Omnex wireless receivers are affected. See table 1 on page 2 for more information in the attached bulletin.

Attachments -

Last Update: June 5, 2020  

June 5, 2020   848   webmaster    Information Bulletins    
Total 0 Votes:
0

Tell us how can we improve this post.

+ = Verify Human or Spambot ?

Log In is required for submitting new question.